6.1.2 Modeling from PDF 1
Video Tutorial
Description
PDF
PDF points can be displayed via the control box in the status bar 
Ceilings and similar elements:
1. draw area 
2. add or remove additional points → modification toolbar 
& + or -
& + or -3. cut openings → toolbar cut or cut through 
4. convert surface into a volume → modification toolbar 
5. set Z-height in Modify area
6. define inclination
- element converted into a mesh 
(modification toolbar)
(modification toolbar)- Stretch individual points with key 7
- Set the bend angle in the Modify area to 0 so that all 3 corners are visible. Then flip edges if necessary.
Walls:
1. catalog element wall use 
2. two walls can be connected 
(modification toolbar) or an end angle can be defined (modify area)
(modification toolbar) or an end angle can be defined (modify area)3. add openings 
4. openings specially
- Model opening , weld if necessary 
- Define volume as IFC type Opening (In the Modify area) and then select the wall as a connecting element
*Shortcut: If several slabs have been modelled, the slabs can be cut with the touching walls. Activate all ceilings and press key C + W + A, then the ceilings cut volumes into the walls. This way the height of the walls does not have to be modelled individually.
Attached files
- Tutorial.pdf 133.5 KB